Due to the color difference and appearance defects of natural stone, the product needs to be typeset to achieve a perfect decorative effect. The quality of the stone typesetting effect is directly related to the overall decorative effect. So, how to arrange stone typesetting? How to typeset reasonably? Next, let's take a look with the editor of FABULOUS Group.
stone plank layout
According to the agreement board (sample) provided by the customer, select the materials and process, and then typeset and separate the strips one by one. According to the color of the scene, ensure that the axis position (front) or the color of the main facade is the same, and the color slightly different is used in the axis position The secondary facade, corner or high floor. But the color should be basically the same, the transition is natural, and there is no difference in color overall. According to the processing dimensions of the plan and the list, write the dimensions of each part on the side of the product one by one, and indicate the part, axis position, box number, and put it on a shelf, and so on. The bridge cut products can be processed according to the planned size, which can save time and improve efficiency.
Reasonable layout of stone slabs
According to the sample provided by the customer, perform material selection and sanding sawing, calculate how many square meters of blocks can be used to produce large plates of square meters, and then divide the plates polished by the automatic grinder according to the color and fill in The detailed quality schedule is transferred to the bridge cutting, so that the next process can be prepared in advance or the slab can be purchased.
The batching staff can calculate the material plan in time and accurately according to the drawing list and the detailed list of the plan. First, it is necessary to ensure that the color of the main facade (front) is consistent with the sample, and then adjust according to the elevation, area, and floor of each axis. Use slightly different colors on the back, corners, secondary main surfaces, and high floors (10th floor). the above). However, the color of the entire facade (parts) should be natural, and no color difference can be seen. It is calculated that each large board should be cut into several large specifications and several small specifications, so that large and small products can be used together.
The bridge cutter must strictly follow the batching plan of the batching staff. If there are more material-saving methods, it can be adopted first. Pay special attention to the products with smooth patterns and pay attention to the direction of the patterns. Products with follow-up patterns must be connected with the patterns smoothly. And number it on the side of the product to indicate the direction of the arrow.