Bala granite has a wide range of applications, and can be used as decorative materials for floors, countertops, carvings, and engineering exterior walls. It has a very large hardness, therefore, it is often used by people to decorate the ground and countertops, which brings people a very beautiful visual effect. So, how to maintain the domestic Balahua granite? Below, let's take a look with the editor of FABULOUS Group.

　　First of all: remember to rinse the Bala flower directly with water, because natural stone, like natural wood, will absorb water after being immersed in water, and it is easy to dissolve in water and soak into pollution.

　　If the stone absorbs too much water, unnecessary lesions will occur, and the severity is very bad. For example, the stone will crack, weather, fall off, float, spit yellow, water spots, rust spots, and white after absorbing or dissolving water. Various problems such as blooming and matte.

　　Therefore, natural stone must not be directly washed with water or wiped with a wet mop. Even if a good professional stone protective agent is used, it cannot be 100% guaranteed that the stone will not absorb the possibility of pollution. Therefore, when the stone is contaminated, it must be removed as soon as possible.

　　Secondly: Avoid contact with non-neutral materials. In natural stone, all Bala flower stone is afraid of acid and alkali corrosion. For example, acid often causes pyrite minerals in granite to oxidize and produce yellowing. Acid can decompose calcium carbonate contained in marble and cause surface erosion. Alkali can also erode granite feldspar and quartz silicide. The crystal grain boundary causes the phenomenon of crystal grain peeling.

　　Another example is non-neutral cleaners or water-based waxes, oily waxes, acrylic waxes and other waxes, which generally contain acidity and alkalinity. Long-term use will cause the surface of the stone to lose its luster, and the residual chemicals will make the stone later disease.

　　Finally: Do not cover the surroundings of the stone for a long time. For the smooth breathing and circulation of the stone, do not cover the surroundings, otherwise the moisture under the stone will not volatilize through the pores, causing the stone to cause troubles and wrong maintenance of the stone. The method will make the stone more damaged, which is often caused by a series of problems such as excessive moisture and high water content of the stone itself.

　　If you have to cover the carpet or debris, please keep it clean and clean. Remember not to use electrostatic stripping and dust collectors to clean and remove dust, regardless of the beautiful flower color, soft marble or soft steel stone. Intolerance to soil particles and long-term damage by wind and sand.