Waterjet is called "universal cutting machine", it can cut almost any kind of material, such as steel, alloy, stone, ceramics and other materials. So, do you know the common problems of waterjet cutting stone? Let's take a look.

　　Q. Can people approach when the water jet is running?

　　A. During the operation of the water jet, the power of the high-pressure water jet is very large, so the operator must keep a certain distance from it to avoid accidental injury.

　　Q, can the water after waterjet cutting be used again?

　　A. When the water jet cuts the workpiece, it will bring the cut pieces of the workpiece into the water. If sanding is needed, the cut sand will also be brought into the water. If it is to be reused, it needs to be filtered. Instead, it increases costs.

　　Q, do I need to punch holes when using waterjet cutting tools?

　　A. The water jet does not need to be punched in advance when cutting, and the water jet will directly cut the tool according to the figure.

　　Q, what is the hourly cost of cutting with a water jet?

　　A. The consumables for waterjet cutting are all very cheap materials, so the cost of using waterjet cutting for 1 hour is about 50 yuan without including labor.

　　Q, can the garnet sand used by the water jet be used repeatedly?

　　A. The edges and corners of the used garnet sand will be smoothed during the waterjet cutting process, and it is useless to use it again

　　Q, what is the water quality requirement for waterjet cutting?

　　A. Waterjet cutting has very low requirements for water quality. Generally, as long as there is no impurities, it is best to use civilian tap water.

　　Q, can waterjet cut tempered glass?

　　A. The characteristics of toughened glass cannot be cut, and neither can waterjets.

　　Q, is it difficult to operate the water jet?

　　A. The operation of the water jet is very simple, as long as the image is designed with CAD, the water jet can be cut